Contamination Control » Park Bioservices Mo-HEP Bedding Dump Station
Park Bioservices NEW MO-HEP XL Lab Animal Bedding Dump Station
The newest Park Bioservices product line the “MO-HEP XL” is
a mobile HEPA filtered, point of use bedding disposal unit to be used
with a large 1 cubic yard capacity structural foam tilt truck. It is
designed for the larger vivarium, and protects technicians from
breathing airborne particles of waste bedding, dander, animal waste and
food particles when dumping dirty caging.
The “MO-HEP XL” is constructed of
polypropylene. Room air, dust, particulate and gaseous vapors are pulled
through the dump orifice and then through the pre- filter and enclosed
HEPA filters by a blower. The exhaust air is HEPA filtered (99.97% at .3
microns)
MO-HEP XL is equipped with non-marking castors for easy handling and mobility to and from the work areas.
Cost effective solution for bedding disposal, both in the initial cost and the cost to operate.
- Nearly silent operation
- Easy to clean
- Easy to control
Options:
- Large 1 cubic yard foam tilt truck
-
Extra Pre-Filters
- Extra Hepa Filters
Capacity:
- 1 cubic meter
- Length 1850mm x width 1346mm and height 1143mm
The Original MO HEP
Our Animal Bedding Dump station is
designed to protect technicians from breathing airborne particles of
waste bedding, dander, animal waste and food particle when dumping
soiled cage bedding. The Mo-Hep is specifically designed for lab animal
non-quarantine situations. Its mobility and easy access allows you to
work along side your changing station or designated areas for dumping
cages.
CUSTOMER DRIVEN:
We have listened to our customers need for a practical and
efficient design that transforms what they work with everyday, a lined
trash can dumping cages. With nothing to set up, the technician just
rolls the lined waste can into the MO-HEP, turns on the
blower/filtration switch and begins dumping cages. When full, the
Technician seals
the bag within the unit to insure contamination control.
TESTING:
View the Smoke Test Video which demonstrates how efficient the capture is maintained at the opening to the dumping area.
CONSTRUCTION:
The Mo-Hep is constructed of impact resistant
Polypropylene. Room air, dust, particulate and gaseous vapors are pulled
through the dump orifice and then through filters by a 110 Volt/ 60 Hz
blower operating at 140+ CFM. HEPA exhaust is standard.
PERSONEL PROTECTION:
We always recommend the use of proper personnel protection
as a primary means of protection. Wether you are working in a dump
station, changing station or biosafety cabinet, they are all secondary
containment devices.
DIMENSIONS:
• 24” L X 34”D X 40”H**
• Capacity=25-32 Gallon, Box: 12 X 12” X 24”
Click here to view ALN Magazines September 2008 article on MO-HEP Bedding Dump station for lab animal facilities.
Benefits/Features:
- Lower Cost compared to other bulky/heavy systems.
- Small foot print fits in nearly every facility and remote site
- Mo-Hep can be easily moved to and from the work area with the supplied casters.
- Powerful 160 CFM blower motor insures capture of most allergens
- Pre-filter extends HEPA filter life
- Low Cost easy to change cartridge HEPA filters
- Design readily accepted by technicians due to familiar 33 gallon waste receptacle
- Priced below most capital budgets
Options:
- Adaptations available for rabbit
- Extra barrel and swivel base
- Extra pre-filters
MoHEP_2011.pdf